Posts: 3
Joined: Tue Oct 20, 2015 5:55 pm

Re: Soldering tips?

Thu Oct 22, 2015 11:26 pm

A "hoof" or bevel tip is really useful for surface mount soldering. If you are using a milled PCB or home-made PCB, definitely pre-tin the pads.
Buying a syringe full of flux from digikey is a great investment. You'll pretty much need a microscope or some sort of magnifier, which is a bit of an investment. But I'm sure your local hackerspace has one!

With a flat tip and flux, you can pull off stuff like this:

Other people have mentioned, but generally, aligning the module, holding it down with a piece of tape, and soldering one pad at each of the corners first is a good way to get it anchored, the fill in all the other pins.

Posts: 13
Joined: Tue Nov 03, 2015 7:33 pm

Re: Soldering tips?

Wed Dec 02, 2015 9:26 pm

I was having trouble with the USB connection, it would drop and Windows with scream. I checked the solder job on my WiFiMCU:
[img]aaes.us/1202_1.jpg[/img] since the img link doesn't work http://aaes.us/1202_1.jpg

How it got out the door at the manufacture is beyond me.... Close is only good with horse shoes.

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest